Product directory

Home > WZ8010/WZ9010

WZ8010/WZ9010
WZ8010/WZ9010
Product Introduction:
Intelligent paperless conference file management host
  • features



    Description

    WZ8010

    Centralized and effective for intelligent paperless conference systems in one conference room or multiple conference rooms via the Internet

    Management, improve the ability of multimedia paperless conference system conference information exchange management and information backup.

    X86 architecture integrated machine design, iron chassis;

    High-definition output display: Adopt US display chip resolution 1920*1080, 16:9;

    External 1 pull-type hard disk expansion box;

    Remote one-button control switch or restart interface;

    Using AVC double ball copper core fan, running at ultra low temperature;

    19-inch standard rack-mounting;

    Green and environmental protection: low power consumption, low carbon emissions, no harmful substances such as mercury and sodium;

    Meet the paperless green environmental protection requirements.

    WZ9010

    Input video supports up to 2048×2048 resolution;

    Support SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards;

    Support 2K (2048×1080) mode;

    The output signal resolution can support up to 2048×2048 pixels;

    Output frame rate can support up to 120fps support 4:2:0 8-bit;

    Output format: NV12, I420, YV12;

    Use two video processing pipelines, each processing bandwidth of up to 180M pixels / s;

    Support PNG format OSD screen (maximum frame size is 2048×2048);

    For any input signal, any channel output stream can be output for each output stream;

    Set cropping, aspect ratio, color space, resolution, frame rate, deinterlacing, color adjustment, OSD and other attributes;

    Support ultra-low latency 64 line video delay through;

    Video output SG-DMA;

    Support automatic detection of Intel GPU block image surface;

    DirectGMA supporting AMD GPU;

    GPUDirect supporting Nvidia GPU.






  • Comment

DM20new version update step

    

1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)

        

2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen

    

Follow the prompts to complete the installation steps.



Disclaimer: There are pictures in the text from the network, if there are copyright issues, please contact the author to delete!     
Go Back