Product directory

Home > SRX725

SRX725
SRX725
Product Introduction:
2 Way Dual 15 Inch Professional Speaker
  • features



    Description

    The domestic high-qual ity unit is used as the core component, with smooth frequency response and precise coverage angle. The

    sound is crystal clear and transparent, and the space and texture are excel lent.

    A new generation of cost-effective professional speaker system, designed for all kinds of sound reinforcement places such as slow

    rocking bar. It is known for its excel lent conversion characteristics such as high conversion efficiency, strong penetration level,

    dynamic and powerful. Its constant directivity horn and neodymium treble design have almost the same sound field coverage as the

    woofer. The designed matching high-frequency horn and the coverage characteristics of the woofer achieve a smooth transition,

    providing a wide sound coverage angle, natural and open sound. It has a high conversion efficiency, making it easier to match the

    power amplifier, and the drive problem is solved. And through the LMS, SmaartLive and other software to design a rigorous crossover

    circuit, with excellent signal crossover processing performance, and designed with high-pitched dynamic protection circuit, can make

    the speaker effectively protected under the conditions of continuous high output.


    Specification

    Model SRX725
    System 2WAY FALL RANGE
    Frequency response 53Hz-20KHz
    Driver LF:15"×2 HF:3"×1
    Rated limpedance 4Ohms
    System sensitivity 100dB
    Rated power 1200W
    Peak power 4800w
    Maximum SPL 136dB
    Diffusion  Angle 75°×50°
    Crossover  mode internal Crossover
    Net weight 45kg
    Size(mm) 1219W×541D×508H
    Package size(mm) 1319W×641D×608H




  • Comment

DM20new version update step

    

1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)

        

2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen

    

Follow the prompts to complete the installation steps.



Disclaimer: There are pictures in the text from the network, if there are copyright issues, please contact the author to delete!     
Go Back