The H415 speaker is a 2-cell 2-way full-range speaker in the H-series with a flight case structure. A 15-inch bass is used as the mid-bass to reflect the vocal and mid-low frequency dynamics. A 3-inch 75-core treble driver guarantees sound pressure, penetrating power and ultra-high quality. The 600W high-power two-way frequency is composed. The professional speaker of the show, in which the treble load horn is an integrated molding die, has the remarkable characteristics of large dynamic, high sound pressure and long range. The air cabinet case has a simple system, convenient transportation and use, and is suitable for medium and small mobility. Deductive class sound reinforcement. It adopts 18MM splint and uses 1.22mm Nissan fireproof board to directly fit on the shell of the speaker. All corners are equipped with aluminum alloy parts to prevent damage from external impact, and the spring jaw universal wheel provides great convenience for transportation.
The aviation speaker is equipped with 4 wheels for extremely convenient mobile performance. The full set of waterproof material design can be used for outdoor performances around the clock. The box has 4 ABS material handles to greatly reduce the handling cost. The bottom of the speaker is equipped with 4 foot pads for the speaker to move. There will be no bumps on the speakers during the process. The H415 speaker independently develops the remote horn by means of computer test software by opening the mold. The horizontal directivity of 80° allows the sound to be clearly transmitted to every corner.
MODEL H415 System 2 WAY FULL RANGE Frequency response 50Hz-18KHz Driver LF:1x15", HF 1x3" Nominal lmpedance 8 Ohms System sensitivity 95dB Rated power 600W Peak power 2400W Maximum SPL 127dB Package size mm(W*D*H) 438*459*865MM
DM20new version update step
1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)
2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen
Follow the prompts to complete the installation steps.