Product directory

Home > LA210/LA210A

Product Introduction:
3 Way Dual 12 Inch Line Array Speaker
  • features


    Indoor and outdoor performance/fixed instal lation two frequency l ine array

    speakers, can deal with unexpected rain weather and water density high

    humidity requirements of professional ampl ification.

    All parts according to the grades of ip46 international dustproof and waterproof

    design standards, and particularly on enclosure structure diversion, splash

    device is designed. Special production seal ing technology is adopted in the

    assembly of the equipment, so as to ensure that the equipment can meet the

    dustproof, waterproof and safe features of ip46 level or above, and at the

    same time can normally play the function characteristics of high quality sound


    Speakers can adjust the angle of 0 to 10 °, the speaker accessories design

    simple and flexible, you just need to 2 engineering personnel easy to form a

    system. Therefore, we only need to select an appropriate number of ultra-low

    ground components to form a sound amplification system with wide directionality,

    long projection distance, high sound pressure and good sense of hearing.

    Are widely used in the movie theater, multi-function hal l, churches, schools,

    large and medium-sized stadiums, and large and medium-sized fami ly the

    ampl ification performances, language, etc.


    MODEL LA210 LA210A
    System 2 WAY FULL RANGE Sub bass
    Frequency response 67Hz-18KHz 32Hz-400Hz
    Driver LF:10"×2,HF3"×1 LF:1:8*1
    Nominal lmpedance 8 Ohms 8ohms
    System sensitivity 101dB 98dB
    Rated power 800W 800W
    Peak power 3200W 3200W
    Maximum SPL 131dB 128dB
    Crossover mode Internal/ External External
    Cover Range 80*12 N/A
    Suspension Suspension array frame/on the floor
    Net weight 38KG 50kG
    Product size mm(W*D*H) 730W×470D×295H 730W×668D×510H
    Package size mm(W*D*H) 920W×490D×360H 861W×836D×672H

  • Comment

DM20new version update step


1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)


2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen


Follow the prompts to complete the installation steps.

Disclaimer: There are pictures in the text from the network, if there are copyright issues, please contact the author to delete!     
Go Back