Product directory

Home > LA206/LA206A

LA206/LA206A
LA206/LA206A
Product Introduction:
2 Way Dual 6.5 Inch Line Array Speaker
  • features



    Description

    Indoor and outdoor performance/fixed instal lation two frequency l ine array

    speakers, can deal with unexpected rain weather and water density high

    humidity requirements of professional ampl ification.

    All parts according to the grades of ip46 international dustproof and waterproof

    design standards, and particularly on enclosure structure diversion, splash

    device is designed. Special production seal ing technology is adopted in the

    assembly of the equipment, so as to ensure that the equipment can meet the

    dustproof, waterproof and safe features of ip46 level or above, and at the

    same time can normally play the function characteristics of high quality sound

    reduction.

    Speakers can adjust the angle of 0 to 10 °, the speaker accessories design

    simple and flexible, you just need to 2 engineering personnel easy to form a

    system. Therefore, we only need to select an appropriate number of ultra-low

    ground components to form a sound amplification system with wide directionality,

    long projection distance, high sound pressure and good sense of hearing.

    Are widely used in the movie theater, multi-function hal l, churches, schools,

    large and medium-sized stadiums, and large and medium-sized fami ly the

    ampl ification performances, language, etc.


    Specification

    MODEL LA206 LA206A
    System 2 WAY FULL RANGE Sub bass
    Frequency response 95Hz-20KHz 43Hz-400Hz
    Driver LF:6.5"×2,HF1.73"×1 LF:15*1
    Nominal lmpedance 8 Ohms 8ohms
    System sensitivity 97dB 97dB
    Rated power 250W 600W
    Peak power 1000W 2400W
    Maximum SPL 126dB 126dB
    Crossover mode Internal/ External External
    Cover Range 100*8 N/A
    Suspension Suspension array frame/on the floor
    Net weight 15KG 30kG
    Product size mm(W*D*H) 535W×336D×194H 535W×559D×439H
    Package size mm(W*D*H) 442W×295D×647H 802W×800D×483H




  • Comment

DM20new version update step

    

1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)

        

2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen

    

Follow the prompts to complete the installation steps.



Disclaimer: There are pictures in the text from the network, if there are copyright issues, please contact the author to delete!     
Go Back