Product directory

Home > FP20000Q/FP10000Q/FP8000Q

Product Introduction:
4 Channel Class TD Switching Power Supply Power Amplifier
  • features


    It is a switch power supply ampl ifier,the net weight is very low.

    Adopt SMT technology,The qual ity is more stable and the spare parts are accurate.

    It has 30Hz and 50Hz low cut mode to reach a perfect l imit function.

    The work mode is stereo mode,bridged mode and paral lel mode.

    It has independent cl ip.protect,signal direction,it wi l l watch the work mode of each channel easi ly.

    The heat dissipation is very good,as it adopts intel l igent fans,it wi l l insure the machine in a cool situation.

    The machine has internal l imit system.If the THD is more than 0.5%,the l imit system wi l l on work to protect the machine.



    FP Series FP8000Q FP10000Q FP20000Q
    8ΩStereo Power(RMS) 800WX4 1350WX4 4X2200W
    4ΩStereo Power(RMS) 1400WX4 2700WX4 4X4000W
    2ΩStereo Power(RMS) 1600WX4 2500WX4 4X4500W
    8ΩBridged Power(RMS) 2800WX2 4200WX2 2X8000W
    4ΩBridged Power(RMS) 3200WX2 5000WX2 2X9000W
    Frequency Response(+o/-0.3dB,1W/8Ω) 20 Hz - 34 kHz 6.8 Hz - 34 kHz
    THD 20 Hz - 20 kHz for 1 W <0.1%
    Signal-to-Noise Ratio >112 dBA
    Channel separation (Crosstalk) at 1 kHz >70 dB
    Input Connectors (per channel) 3-pin XLR, electronically balanced
    Output Connectors (per channel) Binding Posts 2-pole
    Class TD
    TourClass Protection ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
    Operating voltage, 230 V / 115 V nominal 130-265 V / 65-135 V selectable
    Voltage Gain(dB) 23, 26, 29, 32, 35, 38, 41, 44 dB selectable
    Input impedance 20 kOhm
    Level adjustment (per ch.) Front-panel potentiometer, 31 position detented from -inf to 0 dB
    Dimensions (W×H×D) 483×88×396mm
    Packing dimension 580×180×560mm
    Gross weight(kg) 15 17 18.5kg


  • Comment

DM20new version update step


1) Copy the compressed package to the USB flash drive (note that you don't need to decompress it, it is best to format the USB flash drive first)


2) Insert the USB flash drive into any USB port of the mixer, and click “SETUP” on the mixer panel → “Maintenance” → “Update from USB” in the screen


Follow the prompts to complete the installation steps.

Disclaimer: There are pictures in the text from the network, if there are copyright issues, please contact the author to delete!     
Go Back